Tots Bots are probably one of the most well known brands in the cloth nappy world. They are based in Glasgow and all their nappies are made in their factory there too. Today Tots Bots are launching their newest nappy; the EasyFit Star, and we were lucky enough to be sent some to try on Toby and Gabe before the launch.

We’ve been big fans of Tots Bots ever since Toby started wearing cloth nappies at seven weeks old. Both boys have always worn Tots Bots Bamboozles overnight and we really liked PeeNut when we tested them before their launch last year.

Tots Bots have had an all-in-one birth-to-potty nappy called the EasyFit for a long time. It has had several incarnations from the V1 through to the V4. We have had a couple of EasyFits – a V3 in one of their Frugi prints which was very cute but we found the minky fabric wasn’t very absorbent causing leaks after a few hours. We also had a V4 and I loved the dinosaur print. The V4 is made of ‘binky’ a mixture of minky and bamboo – it is more absorbent than the V3 but very bulky especially with the additional booster and was still prone to leaks around the legs.

When Tots Bots got in touch to say they were bringing out a new EasyFit I was super-keen to give it a thorough testing! And here it is….the new EasyFit Star!

For those of you familiar with previous versions of the EasyFit there have been quite a few changes this time, not just the material of the absorbent core.

So what has changed then? Here are some of the new features according to Tots Bots:

• • ‘No Escape’ Bamboo Buffer Zone – great performance, fewer changes
  • Clever stitch-free seams for maximum performance and no leaks

• • Slim-fitting

• • Ultra-soft bamboo core – the same fabric used in the Bamboozle Stretch

• Waterproof tummy zone – keeps wetness in the core of the nappy

The design of the EasyFit Star is essentially the same as previous EasyFits though – the nappy is all in one piece, you simply tuck the tail of the core into the pocket of the nappy. It also uses the same hook and loop fastening as all Tots Bots nappies and is a one size fits most nappy (from around 8-35lb).

Having used EasyFits before I was really hoping that Tots Bots had managed to fix some of the leaking and absorbency issues of previous versions. And do you know what? They have!

I am so impressed with these nappies. Tots Bots have obviously realised that the fabric they already use in their Bamboozles and the PeeNut pads is fantastic for absorbency so using it in the EasyFit Star makes total sense. The new design around the legs seems to really work to stop leaks too.

We have been using the EasyFit Star on both Toby and Gabe for a few weeks now. Toby is now around 33lb so towards the upper end of the weight range but he’s super skinny so they still fit him well. At two and a half Toby is capable of doing some massive toddler wees and a nappy can go from being dry one minute to totally saturated, and often leaking, the next but we had no trouble with the EasyFit Star. One day I left it on him for about four and a half hours as a bit of an experiment. When I took it off the nappy was incredibly full but with a fleece liner Toby’s bottom was dry and we didn’t have any leaks! I told you I was impressed.

The super absorbent bamboo core does mean a slightly longer drying time than you might get from say a microfibre all-in-one – the EasyFit Star dried in about 18 hours on an airer in the kitchen. It takes longer to dry in the tumble drier than our microfibre nappies too, but not as long as the fully bamboo Bamboozle. I would be happy to sacrifice a fast drying time though, in return for the brilliant results we have had from this new EasyFit.

The EasyFit Star has performed just as well on Gabe as it did on his brother. He currently weighs nearly 18lb but is also quite long and skinny. I tend to change Gabe more often than Toby anyway because he tends to poo more but again on one occasion I left the EasyFit Star on for over four hours and although the nappy was saturated Gabe had a dry bottom and there were no leaks. I don’t know if this is perhaps a bit too much information but both my boys do pretty solid poos most of the time so I can’t really comment on how the EasyFit Star would cope with a poo-splosion!

The only downside I have found with this new offering from Tots Bots is something that I actually find affects all their nappies to some extent; the Velcro fastenings are quite wide and sit close to the top of the nappy. It is great Velcro and even after lots of washing (over two years worth on some of our Tots Bots) it holds its shape and stays sticky. However, I’ve found there is a window of a couple of months when babies are in that stage where they can sit unsupported but tend to lean forward quite a lot, where the Velcro can dig in or rub their tummies, as you can see in this picture of Gabe.

This isn’t a massive problem – it doesn’t affect little babies who are still lying down all the time, and it goes away once they can sit a bit better and have stronger core muscles so they can sit up straighter, but unfortunately Gabe is right at the stage where it’s a bit of a issue. Having said that, you can minimise the problem in the way you fit the nappy – pulling it higher at the front seems to help. And it totally wouldn’t put me off buying the EasyFit Star.

Overall I think this new Tots Bots nappy is fantastic. After four previous versions I think they have finally nailed it with the EasyFit Star – a super-absorbent, leak-free all-in-one nappy!

The Tots Bots EasyFit Star is available now from Tots Bots direct and from their usual stockists.

**Disclosure: I was sent the featured products in return for this review. All opinions are my own.

**This post contains affiliate links